FD35‑RTS
Rough Terrain Forklifts
Rated load capacity: 3,500 kg
Maximum lift height: 4,500 mm
Consult now
On remote infrastructure and utility projects, a HAMAC FD60-RT 6 ton rough terrain forklift is used to transport building materials, pipe sections and equipment pallets between delivery points, temporary storage zones and work fronts. The machine connects access roads with construction and installation areas on uneven ground.
With a 6000 kg rated capacity, diesel 4WD drivetrain, high ground clearance and large deep-tread pneumatic tyres, the FD60-RT is designed to maintain traction and stability on gravel, soft soil and sloped terrain. This makes it well-suited to remote sites where surfaces are not fully prepared.
The customer is an infrastructure and utility contractor working on projects such as rural roads, pipelines, transmission lines and remote facilities. Sites often have long access roads, temporary laydown areas and dispersed work fronts.
Materials including concrete products, steel sections, pipe bundles, cable drums and equipment pallets are delivered by truck to staging points and must be distributed to different parts of the site. The contractor required a 6 ton-class rough terrain forklift to handle these loads safely.
Remote project locations feature unpaved access roads, variable ground bearing capacity, slopes and drainage features. These conditions challenge standard forklifts and can cause delays in material movement.
Loads such as pipe bundles, precast elements and equipment pallets are heavy and sometimes awkward, requiring adequate lifting capacity, mast stability and careful handling to prevent damage or incidents.
Work fronts are spread out along corridors or networks, so materials must be moved efficiently over distance while avoiding interference with other construction activities and mobile plant.
Weather can quickly affect ground conditions, with rain and temperature changes causing soft spots or reduced traction, increasing the need for dedicated rough terrain capability and disciplined operating practices.
The contractor selected the HAMAC FD60-RT rough terrain forklift, a diesel-powered machine with 4WD and a high-clearance chassis. Deep-tread off-road tyres provide positive traction on mud, gravel and loose soil.
The FD60-RT offers a 6000 kg capacity at a 600 mm load center and a typical lift height around 3000 mm, allowing it to handle heavy pallets, pipe packs and structural components used on remote infrastructure and utility projects.
In daily operation, the FD60-RT unloads materials from trucks at laydown areas near the site entrance or along access roads. It then transports pallets of concrete products, steel and consumables to closer staging points near work fronts.
The forklift moves pipe bundles and cable drums to excavation or installation areas, positioning them for crews laying pipelines or pulling cables along corridors. Its off-road performance allows it to reach sections where access tracks are still developing.
For structural and equipment works, the FD60-RT delivers equipment pallets, small cabinets, support frames and other components to foundation locations or platforms, supporting installation teams working on utility structures and remote facilities.
Between major tasks, the machine assists with moving temporary barriers, site cabins and fuel pallets, helping maintain organized site logistics and supporting multiple construction activities.
Operators are trained on FD60-RT operation, including driving on slopes, assessing ground conditions and handling heavy, sometimes elongated loads. They follow load charts and keep loads within the 6000 kg rating.
Daily inspections focus on tyres, mast, forks, hydraulics and brakes, with attention to wear from abrasive surfaces and heavy-duty use. Routes are planned to avoid excessively soft ground, steep unsupported slopes and conflict with other mobile equipment.
Additional caution is used in wet or low-visibility conditions, with adjustments to travel speed, routes and timing of heavy movements. Spotters may assist when manoeuvring near excavations, structures or other equipment to maintain safe clearances.
Using the HAMAC FD60-RT rough terrain forklift improves material transport efficiency on remote infrastructure and utility projects, reducing dependence on improvised transport and manual handling. Materials reach work fronts more reliably despite difficult terrain.
The contractor benefits from more predictable logistics, better organization of laydown and staging areas, and improved safety compared to using standard forklifts or only loaders for palletized loads. The FD60-RT’s off-road capabilities help maintain progress in changing site conditions.
Overall, the FD60-RT enhances productivity, stability and flexibility in remote infrastructure and utility project material handling by combining 6 ton lifting power with robust rough terrain performance.
"If you have projects with similar lifting requirements, our team can recommend the right HAMAC telehandler or forklift configuration."
Please fill out the form, and we can satisfy any of your needs including equipment selection, scheme design, technical support, or after-sales service. We will contact you as soon as possible.
